Shenzhen Photon Broadband Technology Co., Ltd.
Main products:Headend Platform,CATV Outdoor Equipment,CATV Indoor Equipment,Broadband Equipment
Products
Contact Us
  • Contact Person : Ms. Liu Betty
  • Company Name : Shenzhen Photon Broadband Technology Co., Ltd.
  • Tel : 0086-755-86149862
  • Fax : 0086-755-86156819
  • Address : Guangdong,Shenzhen,2/F Hivac BLD,2nd Langshan Rd ,North Hi-tech Industrial Park Shenzhen,China
  • Country/Region : China
  • Zip : 518057

Fiberway2000series Optical Network EPON ONU

Fiberway2000series Optical Network EPON ONU
Product Detailed
1.complies with IEEE802.3ah 2.PRC communication industry standard (YD/T 1475-2006).

Description

Fiberway2000 series is MDU which complies with IEEE802.3ah and PRC communication industry standard (YD/T 1475-2006). It integrates with the functions of the Ethernet switch and ONU, so when it works together with OLT products an efficient EPON solution can be established. It is well applied on the bidirectional network of broadcast and TV, FTTO or FTTB.

Features

EPON: Fiberway2000 supports IEEE802.3ah and PRC Community Industry Standard (YD/T 1475-2006).System’s capacity: The standard configuration of Fiberway2000 has 8 to 16 Ethernet RJ45 ports, realizing the mergence of ONU and the Ethernet switch in the “EPON+LAN” solution.Device size: A 1U device occupies a little space and consumes little power, decreasing the function cost of the services.These EPON products adopt the point-to-multipoint network topology, effectively collect separate Ethernet services and aggregate them. They provide the standard fast-Ethernet interface (RJ45) on the user side and can be connected to the existing network smoothly.Their dynamic bandwidth distribution mechanism enables all users to share the 1Gbps bandwidth reasonably, realizes reliable QoS and guarantees different services in a same network different qualities.They support the IGMP multicast and efficiently utilize the bandwidth.They support port isolation.They support the Ethernet loop detection, automatically judge whether the device-connecting network has Ethernet loopback interrupted, and resume the loop when the loop disappears.They support the multicast VLAN.It supports ACL filtration in layer 2 to layer 7.It supports remote loopback and remote diagnosis of the network state.It has rich OAM function designs, including the configuration, alarm, performance monitoring, fault separation and security management. It not only provides the remote OLT management mode but also supports local console platform management.  

Specifications

Attributes

Fiberway2008

Fiberway2016

Interface

8 fixed 10/100BASE-T interfaces

1 fixed PON port

16 fixed 10/100BASE-T interfaces

1 fixed PON port

System’s capacity

Maximum coupling ratio, 1:64

PON interface

A 1Gbps transmission rate with downlink and uplink symmetry

Hi-sensible optical receiver: Not less than -30dBm

Security: ONU authentication mechanism

Network coverage diameter: 30 kilometers

Standard

IEEE802.3ah

IEEE 802.1D, Spanning Tree

IEEE 802.1Q, VLAN

IEEE 802.1w, RSTP

IEEE 802.3ad physical link static/dynamic aggregation (LACP)

Ethernet – II, Ethernet-SNAP

IEEE 802.3ad VLAN Stacking( Q in Q)

QoS

Backpressure flow control (half duplex)

IEEE 802.3x flow control (full duplex)

IEEE p802.1p, CoS

WR, SP and FIFO

Supporting the Mark/Remark priority of 802.1P/DSCP

Limiting the uplink/downlink rate based on each ONU

Supporting DBA and SLA

VLAN

Port-based VLAN

IEEE802.1Q VLAN relay

Supporting QinQ and flexible QinQ

Multicast

IGMP v1/v2/v3

IGMP Snooping

Multicast VLAN and limited multicast

Reliability

Unidirectional Link Detection (UDLD)

Hot swap of the EPON optical module on the expanded slot

EAPS fast loopback protection function

Optical path protection of EPON

Network security

Limiting the maximum number of users on each port

Port isolation

Controlling the storm of packets

Flow-based ACL access control function

Transmission data encryption on the PON interface

Configuration management

Various management modes such as CLI, Web, SNMP, TELNET and cluster

RMONv1, group 1, group 2, group 3 and group 9

SSHv1/v2

Upgrading the software and the bootrom through TFTP and FTP

Local or the server’s syslog logs

Command prompt in English or in Chinese

Network testing tools such as ping and traceroute

Debug output

Physical size

Installation: Desktop/standard cabinet

Environment requirements

Working condition: 0°C-55°C; 10%-85% no condensation

Storage condition: -40°C-80°C; 5%-95%; no condensation 

Power Source

Input voltage: AC100-240VInput frequency: 47-63Hz

Input current: 1A/230V

Fiberway2000series Optical Network EPON ONU



Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.